Discounted brand new filament in different colors for sale! We have a 3D printing service business and we had a need for many colors last year. Now, we are mainly printing in basic colors and want to offload some of our inventory. We bought these, never opened, ABS & PLA 1KG spools and they are brand new. Selling at $13/spool. **Normal price is $22-25 per roll!!**
I'm using HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Black. It snapped and about 2 inches of filament is now stuck in the extruder. I've tried pushing it out with a small screwdriver after heating it, but it did nothing. I've also tried doing that while running the extruder motor. Any ideas?
Hello, attached photos , can some one tell me if this is the moisture effect in a filament its hatchbox petg silver color
Something seems off. I'm getting very noticeable filament lines in my prints. Some parts of this model look a lot better than others as you can see. I have tried adjusting my temperature (195 Extruder, 60 Bed), speed, height (0.1), the works. I'm stumped. Has anyone had this issue before? I'm using a Monoprice select mini printer and Hatchbox PLA 1.75 filament. Please help me if you can.
I have a Hatchbox Alpha and lately I cannot get ABS or PLA (the only kinds of filament I have) to stick. For whatever reason unknown to me, the filament constantly runs out of the nozzle, and while it may be slow, it is annoying because every 30 seconds there is a bit of filament i have to scrape off the nozzle.
I have noticed that on the customer side of 3D Hubs, PETG is described as:
I have a Hatchbox Alpha. All of the files on the 2 GB disk were erased. I then added a g-code file, as I always do, so I can print. When I put it into the Hatchbox, nothing shows up. But when I put it back into my computer, I can see the file. Do I need all of the files that came on the 2 GB disk to be able to print everytime?
Hey everyone, so I've been using Hatchbox ABS filament for a while now and I absolutely love it! But recently I bought some gold ABS from them and it prints fine, but after about a day of sitting around it starts to just fall apart. Cracks begin to show up and its just incredibly brittle to the point it just falls apart. Has anyone else experienced this or have any guesses as to what it could be?
Hello, I have a new Hatchbox Alpha that I just got today and when I try printing PETG at 240C Hotend and 100C Bed. Mid way through the print, the PETG would stop. I disassembled my hotend and saw the PETG stuck in the PTFE tube and its diameter was about 1.9 ish. The filament is 1.75, anyone got any ideas on how to fix it? Thanks!
new to printing. I'm using onshape Cad for designing. Need to print them in the same scale as they are made on the program. What is the best program to get it from .stl to gcode?
Let me start with a little background first. My son got into 3D printing in middle school. he would bring home some really cool items to show us. We got him a Printer for Christmas and after two months of helping him try to get it to work right we sent it back. A few months ago we bought him a different printer, a Hatchbox Alpha. he wants to print a few items that are big.
I installed the E3D metal hot end on my Hatchbox Alpha. I also installed the (supposedly) screw in compatible thermister. Using M303 E0 S200 C3 it should run a series of 3 heating cycles then give me an average of kP, kI, and kD....but the ONLY way I can get it to run multiple (3) cycles and return results is if I chance the value of C to "1"...????.....
Can someone help me with calibrating my hatchbox alpha. I have been printing on it for a couple of weeks no problem buta coulpe days ago it began to lift at the edges showing what many call the bowl effect. Hatchbox support has been a bit rude to me telling me I do not understand basic geometry. Honestly Delta are not basic the geometry is quite complex.
A couple questions regarding the Hatchbox Alpha, is there a way to set it up with Cura 2.1.3?
Hey all, Just looking for some help. I have recently purchased the Hatchbox Alpha 3d Printer and am wondering which software/ host/ slicer to use with it. I am open to opinions. Also with each respective program how do you configure it to recognize the delta style circular build plate? Thanks
Hi 3D Hubs! I am brand new to the concept of 3D Printing and would like to know if anyone has thoughts on the two printers in the subject. I am planning to purchase one next week. Hatchbox Alpha - Seems "better" on paper. - Fairly new device. Orion - Has been around longer, larger community, a real website. I would love to hear from folks who have experience with these two. Thanks!
Hey Guys, I'm wondering if anyone out there has any experience with the Hatchbox Alpha and can compare it to the Rostock or any other printers, Delta or otherwise. Haven't been able to find much in the ways of reviews. I'm specifically the Alpha uses linear rails and bearings, but I don't know of that's overkill or not.
Are delta printers anything to be getting on about? I want to buy a new printer and have been looking at the Hatchbox Alpha because of its large print volume. Im nervous because delta printers are not that popular
hi all, I got my first 3D printer October of last year. I print using mostly abs, and I’ve gotten quit good with it. I have, I’d say a %98 success rate. The failed %2 is always with red hatch box abs. Even the abs juice I make with it is kinda clumpy. My temps I use is 110c on the bed, and 230c extruder temp. My prints do print, but real sloppy.