1

We are looking to sell our Stratasys Fortus 360mc 3D Production System printer. The printer is in excellent condition with minimal usage, is regularly maintained for calibration, and has no mechanical or software issues.

The details of the printer are as follows:

  • Printer was purchased through a local authorized retailer
  • Model is approximately 3 years old
  • Envelope Size: 14 x 10 x 10 inch (355 x 254 x 254 mm)
  • Material Bays: 1 model, 1 support

We are asking for $52,500 USD for the printer. Upon receipt of payment, we will have the printer re-checked for calibration by the authorized retailer to verify its settings.

In addition to the printer, we also have printing materials and supplies that we are selling. They are as follows:

Model material –

  • 4x SR-30 canisters
  • 4x ASA (3x Blue, 1x Natural) canisters
  • 2x SR-100 canisters
  • 5x PC-10 canisters
  • 5x SR-110 canisters
  • 1x NYLON-12 canisters
  • 4x Packs of Fortus 360mc Foundation Sheets (each pack has a quantity of 20 sheets)

Model tip –

  • 1x T10 model tip
  • 4x T12 model tips
  • 3x T12SR30 model tips
  • 5x T12SR100 model tips
  • 3x T16 model tips

We are asking for $2,500 USD for all of these supplies. We are also open to selling a portion of these supplies as well (price would be discussed).

If you are interested then please contact me at dfuzie@cpiaero.com.

img_1817.jpg
img_1817.jpg3000×4000 2.77 MB
img_1819.jpg
img_1819.jpg3000×4000 2.7 MB
img_1820.jpg
img_1820.jpg4000×3000 2.06 MB
img_1821.jpg
img_1821.jpg4000×3000 2.79 MB
img_1822.jpg
img_1822.jpg4000×3000 2.8 MB
img_1823.jpg
img_1823.jpg3000×4000 2.43 MB
img_1824.jpg
img_1824.jpg4000×3000 2.22 MB
img_1825.jpg
img_1825.jpg4000×3000 1.97 MB