Hello all, I've been using a Monoprice Select Mini for the past 5 months and have been having issues off and on with it but have finally realized I need to reach out for help. As the title states I'm wondering if the files or the printer are the reason for my failed prints and jammed machine.
Does anyone know why on my qidi printer the nozzle temperature is printing at lower than the temperature specified in the file? Thanks for any help!
Hey guys. So I've been trying a few different ways to create PLA filament infused with hemp fibers and, although I have had a few successful tests, nothing seems to be consistent. I am using PLA MakerBot 2x printers for testing the filament. Grinding the hemp fibers into small particles is not an issue, it is more so the actual process of making the filament where consistency becomes an issue.
An employee at Zortrax told me that with the new software update, the m300 will print at the same resolution as the m200, which is 90um instead of the original minimum of 130um. Can somebody confirm this? Can you select this resolution in zSuite?
Finally on Thingiverse: https://www.thingiverse.com/thing:2792618
Hi, I'm interested in buying spark maker sla printer, I want to know which is the best 3d slicer sla printer apart from spark studio 1.9 v.? Are these (other 3d slicer software) compatible with the spark maker? Are these software free to download?
I just finished building my Anet A8, but when I try to preheat the PLA I need to wait for it to get to 190 degrees, but it's been over an hour and it's only at 29. My heatbed is already at the target, but is it normal for it to take hours to heat up? Thanks.
I'm very impressed with the new FFCP I got a week ago. I'm now trying out some dual color prints with ABS and can't seem to change the right extruder temp. I set the right and left temps in the general parameters in FlashPrint but with the printer starts printing it always stays at 220C for the right extruder. Is there another area that's driving this value.
Hi! I am working on a project where I need to get some rubber-like pieces printed to be part of the sealing system of a bottle (limited edition Olive Oil project for a client). The dimensions of this component are around 20 x 15 x 15 mm. Please let me know if you or someone that you know might be interested on this job. Thanks!
https://www.amazon.com/URBEST-IEC320-Equipment-Medical-Devices/dp/B01LZG2MYH/ref=pd_ybh_a_2?_encoding=UTF8&psc=1&refRID=NM9Z7MDHS7EVNVZV8MKC Ok I'm being driven up the wall with this... I don't know how to do wire things properly and I can't crimp wires to save my life. How exactly do I wire up the fan version of the power supply to this switch ↑?
I want to modify some parameters of the printer like doing a Purge Line when I'm printing a part and others. Has someone try it? Thanks.
I've been having some grinding going on lately that shaves off pieces of the ptfe bowden tube, which then clogs my nozzle. Is this common? Are bowden tubes supposed to be replaced at certain intervals? Thanks! James
Hello, i have had my Anet A8 for a little over a month. however on a longer print the filament go twisted around itself and got jammed but i never realized it so the motor was constantly pulling at it but getting nothing done. after this happened i have had issues with my printer as described below.
How can I print in a material that is magnetic? Want to print a small flat part that can stick to a magnet...
The problem began after I had just finished a print.
I'm having a problem with some of my "sharp"corners. it seems like it is dragging previous layers to the outside? I can't find any artikel related to this problem. And i have tried pretty much everyting. (lowering acceleration. making sure al bolts are tight.) The printer is have is a Kossel XL (delta printer) i print at 190° and my bed is at 55°
I purchased this 3D printer as a DIY kit as a hobby for fun. Not having much time to mess around with it has caused me to try to sell it to somebody that will put it to good use. It was purchased for ~$240 online at 3dprintersonlinestore
I upgraded my anet a8 to bowden yesterday hoping for better print quality, however the quality degraded a lot. I tried some extra retraction, lower temperatures on the hotend etc. But nothing seems to work. (Printing with pla)
Hi i've purchased this printer and i've followed all the instruction for the set up. But when i start the classic cube ,or anything else , the printer head start to bumps on the plate. It's like search for a auto levelling sensor. anyone could help me? Tnx for your attention
Hello I purchased a Creatbot DX01 printer. I checked a few small prints and they came out great. Benchy and a few models in the USB stick provided with the machine. However on printing larger models I am facing 2 issues: