so my printer's are being goofy. First I printed 4 tanks, they all delaminated, with some of the gaps being consistant between models, and some gaps that only occurred on one or 2 models. I printed one of the same tank and it came out totally fine, not a single issue and very strong.
Hey, I have been experiencing troubles with my makerbot rep +. It is a brand new machine, bus after several prints, printings keep stopping due to a filament jam notification ( error 81).
Hi all. I have a Wanhao i3 mini. This is my first 3d printer, and I have been struggling with bad curling on my prints. I am using PLA and have tried all the normally suggested things(painters ape,Hairspray, klapton tape) It was printing fine, but now every print fails. I have wondered if this is due to the heatwave here in the UK.
Barly a Day of printing time, comes with everything even original packaging Going on deployment so have to shut down my buisness Asking 9k or best offer Email me at: KD3DP2018@gmail.com if interested. This will be legit buisness only, backed and preferably PayPal for security
Hi I have built and set up my first 3D printer the ender 3 from creality. Ive done a few test prints and there seems to be some protrusions on the sides. Ive been using cura. I was wondering if anyone had ideas to try avoid/fix this.
As the title implies, I am a beginner who is look to buy my first 3D-printer. I am wondering which one offers better value for the money. Also, what the differences between the finder and the dreamer? I can buy (a gently used) Flashforge dreamer on Kijiji for 800-700 dollars. Thank you in advance for your reply(s),
We are selling our Stratasys Fortus 360mc production machine. It's in excellent condition and has been regularly serviced by a certified engineer.Soluble Support Removal System is included. Build size: 355 x 254 x 254 mm.Printable Materials: ABS-M30, ASA, NYLON 12 Suitable applications: Concept Models, Functional Prototypes, Manufacturing Tools and End Use Parts
Hi all, I needed to change the filament spool, and stupidly cut off the old filament above the extruder, then extruded the last bit instead of withdrawing it. So now there's a bit of the last spool that has been fed past the extruder and is stuck in the hot end, so it's blocked when I try and push the new spool filament through.
Printer is Tronxy. Can not get Cura 3.4 to find the correct port. Devices manager says that the printer is on USB-SERIAL CH340 (COM8). How do you set the com port on Cura 3.4. Settings, Printer, Manage Printers, Pursa I3 MK2, Machine Settings simply reads the print is not connected. How is Cura 3.4 set to read COM8? dlw
Hi, I have 7 magazines of 3d Systems filament for free if you're nearby, 5 are 70-80% full, 2 have about 15% left. 2 x INF Support ABS Red PLA Natural 2 x PLA White message me if you're interested, Andy
Hi folks. I am seriously thinking of purchasing an i3 plus mk 2 but I am concerned that the controller connector issue in earlier units is potentially unfixed. If there is still a risk of overheating and fire with these new models that would be a concern.
does anyone know how to fix this. i used 200C and 100 flow.
I am relatively new to 3D printing, and for some reason my parts are coming out misshapen. I have tried changing layer thickness, my z-axis calibration, smaller layer height, alternating extra walls, and slowing down outer wall and initial layer speed, all without any positive effect. Any help would be greatly appreciated. Printer: Anet a8 Filament: PLA Slicing Prog. : Cura
Have a new ender 3, having problems with x or y axis warping ( side to side on the extruder rail) and it always warps to the left. Happens on every large print. I've tightened the belt a million times but its still happening on large prints
Hello to everybody and thanks in advance to who will help me! My name is Luca, I'm italian and I bought an AnetA6 3D printer on AliExpress last 28th March, but I never seen it work! Here is the complete story: 1) Once recived the kit I mounted the whole printer, but at the first power ON nothing didn't work, only a fan turning , no lights on the MainBoard nor in the LCD Display.
Hi everyone! My printer has arrived with a twisted frame. It's corner is warped and the frame is like "propeller-shaped". How much is that critical for printing? Should I replace the whole printer? Is that possible to fix it?
I've been working on how to extrude nylon for quite awhile now, and it's not working right. i'm printing it at 260 Celsius 45 degrees for the bed termperature. The nylon sticks fine to the bed it just doesn't extrude enough filament.
just got a new creallity ender-3, 3d printer any tips how to make it better
dear qidi tech. I have recently bought a brand new 3d printer from a person on ebay It was an unwanted gift and he could not work out how to use it. I have used it now for several prints. Wow what a beautiful printer. I love it. But now i have got a small issue with the touch screen.