Josh

JG
Josh
@Josh4675
Member since

November 2017

1
Posts
#7319
2
Comments
#6210
0
Upvotes
Followed tags

Josh isn't following any tags yet.

7 months 6 days ago - Commented on Flashforge Creator Pro Printer Issues

+1
0
-1

Thanks for your reply! I printed this using Bamtack PLA filament. I used slic3r to slice this object and It was printed at .2 layer height. My printing speeds: Perimeters: 42mm/s Infill: 60mm/s Solid Infill: 20mm/s Travel Speed: 90mm/s First layer: 25mm/s

7 months 6 days ago - Commented on Flashforge Creator Pro Printer Issues

+1
0
-1

Thanks for your reply! I will try to turn down the temps. The cooling fan seems to be running okay from what I can see. I used slic3r to slice this object and It was printed at .2 layer height. My printing speeds: Perimeters: 42mm/s Infill: 60mm/s Solid Infill: 20mm/s Travel Speed: 90mm/s First layer: 25mm/s

7 months 1 week ago - Posted a new Thread

I printed this in PLA, extruder temp: 215 Bed temp: 60
Hey all, I've recently ran into a problem with my flashforge creator pro 3d Printer. The print quality has taken a sudden drop. In the attached picture, you can view a fan mount I printed. The quality isn't horrible, but it's not where i want it to be. I'm thinking it could be a loose belt issue? Thanks for all the help!         -Josh