Justin

JS
Justin
@JustinDS89
Member since

January 2017

3
Posts
#727
6
Comments
#1969
1
Upvotes
#4765
Followed tags

Justin isn't following any tags yet.

3 months 1 day ago - Commented on Flashforge Dreamer

+1
0
-1

I am willing to ship or sell locally (near Tulsa, OK).

3 months 1 day ago - Posted a new Thread

I have a Flashforge Dreamer for sell with a few upgrades/modifications.   This includes a glass bed and the Flexion extruder upgrade. I no longer need this printer, but everything works currently.   I can post pictures and go into greater detail if needed.   Would anyone be interested in this?   Thanks, Justin

1 year 5 months ago - Commented on Problems with a certain print. Support coming loose.

+1
0
-1

Thanks for the reply. I finally got it to print using the slicing software Flashprint.

1 year 5 months ago - Posted a new Thread

I have attempt to print this 5 times with automatically generated supports. About 2 hours to 2 hours and 30 minutes into the print a support will come loose. I have tried adjusting different settings, but at a loss now. Others have been able to print this without issue according to comments.   Any help would be greatly appreciated.   http://www.thingiverse.com/thing:714533

1 year 5 months ago - Commented on Help with 3D model not printing properly.

+1
0
-1

After looking at the model more closely and getting help from someone else I realized there was a slight angle in the model. This made part of the model float in mid air. This would explain the problem I was having.

 

I have since redesigned the model and have yet to print it. I am confident it will print properly now though.

1 year 5 months ago - Commented on Help with 3D model not printing properly.

+1
0
-1

Oh okay, thanks. I will try to see if I can get the repair to work properly and reprint.

 

Other than that I have no idea why it does what it does.

1 year 5 months ago - Commented on Help with 3D model not printing properly.

+1
0
-1

I tried using make printable.com and it seemed to work fine, but now I can't open the model up in SketchUp.

1 year 5 months ago - Commented on Help with 3D model not printing properly.

+1
0
-1

Appreciate the response greatly. I will try running it through makeprintable.com and see if that helps. I will also post back the specific info you asked for soon as I can.

 

Thanks again. Just a bit lost on what to do as another keychain I created prints fine and other STL files I have downloaded print fine also.

1 year 5 months ago - Posted a new Thread

I am completely new at 3D printing and my first design is a 3D Discraft Keychain I created, but when I print the STL file it always messes up on one side of the object. I can print other files though so I have not idea whats wrong. Can anyone help me get this model to print correctly?