Greg

GM
Greg
@Mitcheg1
Member since

November 2015

0
Posts
1
Comments
#8376
0
Upvotes
Followed tags

Greg isn't following any tags yet.

1 year 5 months ago - Commented on HowTo Calibrate, Tune and Fine Tune your printer and filament

+1
0
-1

I'm similarly confused about step 3.  My first layer averaged 0.33mm when I had a 0.2mm layer height.  So does this indicate my nozzle is too close or too far from from the bed?  Do I set my z height to -0.13mm?