Hello guys, i know this question is little bit crazy. I need to colour/dye the sup705 for particular reason. I know probably you would say that its not recommended at all, however i need to do it somehow. What pigments/dyes/inks would you use to do it and how would you proceed with it? The machine is objet eden 260vs. I know there are some people that do that/know how to do that.
I've recently switched over to PLA from ABS as I noticed my heated bed has some burnt wires. I love the print quality I were getting without having to use a print bed so I decided to buy a white PLA to be able to paint.
Hello. So I am quite new to 3d printing as I just got my Anet a8 about two months ago. Everything has been relatively fine since then until now. Out of nowhere my prints are all starting in the lower left corner and going left until it hits the x end stop. I've tried changing the GCODE and setting the origin manually on the print but still nothing. Any ideas?
As with most, I have become increasingly frustrated with the proprietary nature of the xyz company. To try to work around the filament nfc cards I bought a raspberry pi and wired it to the serial port of the nfc reader to no avail (I decided It would be better than resetting/emulating the cards). But I had a new idea.
Hi I need some help please I’m trying to go from a single filament to to 2 filament mixer nozzle I have it set up on the printer but what do I need to change in the settings to get to work do I need to go into the firmware to get it to work or is it just in repetier as I have not got any idea what to do with going into the firmware of someone can help with this It will be much appreciated thanks
Could someone give me the right firmware because i tried everything to levelling the printer but nothing happened right.
I am a complete newbie to 3d printing - I've managed to assemble the A8 and have had two successful prints. Now I have a problem with the extruder motor clicking and not feeding.
Hi, I almost started grieving when my Anet A8 stopped working, I missed it so much! The extruder doesn't seem to be able to push the filament through (please see this video https://photos.app.goo.gl/QvXKcpfY2yCZTHPc9) the cog just 'bounces' to and fro very slightly. So far, have: Turned up the extruder tension. No change Swapped the motor wire for the Y-axis and moved the Y-axis. No change.
Начало на разговор в чат14:3i have problem with the printer Anycubic Kossel Pulley, with auto levelling bed. The printer go up and detect the points instead how it is wrote in the instruction book - to detect the points in the platform! And of course the prints print in the air !!! What i shuould do?
Te koop aangeboden, gebruikte Formlabs 1+ 3D SLA printer uit 2015 en enkele toebehoren, inclusief originele verpakking. Nieuwprijs was €3000,- voor de specs kijk even op:https://formlabs.com/media/upload/Form-1-plus-overview-US.pdf https://formlabs.com/blog/introducing-form-1-plus/
I'm looking at selling our Objet 24. It's 6 years old and done approx. 2600 hours. It's had yearly servicing and in excellent working condition. I can also include the stand and a Quill Vogue wash station, accessories, consumables, software and manuals, etc. Based in UK. Open to offers.
Hello there. I'm still really new to 3d printing and I have a question about the Maker Ultimate for anyone who has that model. I'm specifically asking about the initialization process when I start a print. The printer will heat up the hotend and then move the bed up to the starting position. When this happens, the print bed actually presses into the hotend for a few seconds before lowering aga
I just got my Anycubic Kossel yesterday. I assembled it correctly and went to use the auto leveling... Instead of touching all of the points it just homed each axis and sat there. After trying to get it to work for 3 hours I gave up and tried to print without leveling.
Brand new system won't recognize SD Card. A new one is being sent but I tried a different card and the system would not recognize it either. What is most problematic is that the "Print" touch button does not open the next menu, it simply beeps when I touch it. Anyone have experience with this malfunction and a solution? Thanks!!
What color is the dress? The most commented topic of the week.And here is a LEGO interpretation of this theme)Enjoy the model and leave your comments. Post created with help: -LEGO “The Dress” – Download free 3D Model
I haven't been using my 3D-Printer for quite a while, because of these issues. Today I designed a round part, where the artifacts can easily be seen and it looks terrible. So I need your help. The 'Blobs?' appear at the layer start on the outer-perimeter. I turned down the print speed, and it didn't help.
Question is, once scanned. How easy is it to manipulate image or combine them. I would like to scan an object, then manipulate the scan to make a case for it. 3d printed. Then be able to scan a different object and use the differences to make changes to fit. So software that helps me be flexible. No familiar with machine code. Is this an option?
Lately I noticed that there are some "bubbles" that you can clearly see on the photos below. How is that happening and how to take care of it?
i have a anycubic kossel and for some reazon when i tell it to go to z0 the head is hanging 10 cm above the bed! but when i tell it to go 10 cm down from the top it is also not reaching 10 cm do i need to change the steps per mm? if so how and by how much? Pls help
One model printed 2 days ago overnight = 19 hours. Same model plus 2 additional much smaller parts loaded now saying 14 hours. Any suggestions as to why more parts should equal 25% less time???